Rainbird Esp Me Controller User Manual

admin

4 Item(s)

GridList

The LNK WiFi Module allows remote connection to Welcome to Rain Bird a Rain Bird ESP-ME3 Controller using an Apple iOS or Android compatible smart device. The mobile applica- Thank you for choosing Rain Bird’s ESP-ME3 controller. Tion allows remote access and configuration of one or In this manual are step by step instructions for how to more. Page 1 Rain+Birdt ESP-Me enhanced modular controller Advanced User Manual STATION HOUR MINUTES REMAINING RUN TIME Rain+Birdt.; Page 2: Questions Questions? WARNING: Use only Rain Bird approved accessory In the USA or Canada call Rain Bird Technical Support at devices.

Rain Bird Esp-me Enhanced Modular Controller User Manual

  • ESP-TM2 12 Station WiFi Irrigation Controller including LNK WiFi Module

    Regular Price: $461.90

    Special Price $230.95

    • Add to Compare

  • LNK WiFi Module for Rain Bird ESP-TM2 and ESP-Me Series Controllers

    Regular Price: $139.13

    Special Price $97.39

    • Add to Compare

  • ST8I-2.0, 8-Zone Smart Irrigation WiFi Sprinkler Timer (indoor)

    Regular Price: $189.74

    Special Price $152.90

    • Add to Compare

  • ST8O-2.0: 8-Zone Smart Irrigation WiFi Sprinkler Timer (outdoor)

    Regular Price: $229.00

    Special Price $194.65

    • Add to Compare

4 Item(s)

GridList

The Samsung Galaxy Note 9 is a feature-packed high-end phone aimed at power users and productivity-minded individuals. Its key stand-out features include the large Super AMOLED display, the versatile dual-camera, the huge 4000mAh battery, and the S-Pen digital stylus allowing you to take down notes and annotate documents, as well as to control media playback and flip between presentation slides remotely thanks to its wireless connectivity. And with DeX mode, the Galaxy Note 9 can connect to a TV or Monitor giving you a desktop-like environment for work or play. Samsung galaxy note 9 user manual pdf download at&.

I see a message on the DISPLAY “14NOMOD” what does it mean?

It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.

My Alert light is flashing, what does it mean?

It means that you have a programming error. Either there are: no start times, no run times, or no watering days selected. The controller ships from the factory with the following settings:
1 Start time of 8:00 AM, 10 minute run time for the first 4 stations (base module) and all days set to ON.

My Alert light is illuminated and not flashing, what does it mean?

It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)

How do I run a manual program?

Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR

A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.

How do I run a specific station?

Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.

What settings are reset if I do a factory reset?

Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.

What settings are not reset if I do a factory reset?

Date/Time is the only setting not reset to the factory ship settings.

I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?

Yes, 3 station modules are compatible with the new ESPME.

Do I need to have a 9V battery installed to backup anything?

No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.

Can the ESPME run more than 1 program at a time?

No.

I see a message on the DISPLAY “14NOMOD” what does it mean?

It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.

My Alert light is illuminated and not flashing, what does it mean?

It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)

How do I run a manual program?

Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR

A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.

How do I run a specific station?

Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.

What settings are reset if I do a factory reset?

Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.

What settings are not reset if I do a factory reset?

Date/Time is the only setting not reset to the factory ship settings.

I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?

Yes, 3 station modules are compatible with the new ESPME.

Can the ESPME run more than 1 program at a time?

No.

Do I need to have a 9V battery installed to backup anything?

No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.

I see a message on the DISPLAY “14NOMOD” what does it mean?

It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.

My Alert light is illuminated and not flashing, what does it mean?

It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)

How do I run a manual program?

Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR

A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.

How do I run a specific station?

Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.

What settings are reset if I do a factory reset?

Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.

What settings are not reset if I do a factory reset?

Date/Time is the only setting not reset to the factory ship settings.

I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?

Yes, 3 station modules are compatible with the new ESPME.

Rain Bird Esp Me Troubleshooting

I see a message on the DISPLAY “14NOMOD” what does it mean?

It means that you have there is no module installed for the station. For example, Station 14 would be located in the 2nd bay. Bay 1 is for stations 5-10. Bay 2 is for stations 11-16. So, you either have a 3 station module installed in Bay 2 or no module at all.

My Alert light is illuminated and not flashing, what does it mean?

It means that you have an electrical error. Pay attention to the DISPLAY screen which will scroll a message across it indicating what error condition exists. The controller will automatically skip the affected station and proceed to the next station. To clear an alert condition, make sure the dial is in the AUTO and press and hold the right arrow key for 3 seconds. (Arrow with teardrop shape)

How do I run a manual program?

Turn dial to the Run Manual Program position and press and hold the right arrow key (with teardrop shape) OR

A: With dial in the AUTO RUN position, press and hold the right arrow key (with teardrop shape) for 3 seconds. The program that has the letter shown on the DISPLAY will run.

How do I run a specific station?

Rain Bird Esp Modular Controller Manual


Turn the dial to the Run Manual Station position. Use the arrow keys to choosestation. Use – and + keys to adjust the run time. Press and hold the right arrow (with teardrop shape) for 3 seconds.

What settings are reset if I do a factory reset?

Start/Run Times, watering days, Rain Sensor status is returned to Bypass, Delay watering status is reset to 0 days, Seasonal Adjust % is reset to 100% of program values.

What settings are not reset if I do a factory reset?

Date/Time is the only setting not reset to the factory ship settings.

I replaced my old ESPM with the new ESPME, can I reuse my 3 station module?

Yes, 3 station modules are compatible with the new ESPME.

Can the ESPME run more than 1 program at a time?

No.

Do I need to have a 9V battery installed to backup anything?

No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.

Can the ESPME run more than 1 program at a time?

No.

Do I need to have a 9V battery installed to backup anything?

No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.

Can the ESPME run more than 1 program at a time?

No.

Do I need to have a 9V battery installed to backup anything?

No. All Date/Time information is backed up internally on a long life lithium battery.
The programs and settings are backed upon internal memory. So, no battery is required.